A pump performance curve is an important chart for any pump, representing the variation of differential head developed by the pump against operating flow rate...
Category - Process Equipments
Gas turbines are combustion turbines. They are able to burn various types of fuels (e.g. fuel oil, natural gas) at their combustors under the presence of...
Heat exchanger is one of the most important equipment used in manufacturing industry. There are several types of heat exchangers used in industry such as Shell...
Problems with pumping equipments cause not only inconvenience, but can also contribute to loss of production. An efficient operation depends on trouble-free...
Need for industrial silencers
Industrial silencers are used to control the noise associated with a wide range of industrial processes. Products include vent...
An air cooled heat exchanger, or ACHE, is simply a pressure vessel which cools a circulating fluid within finned tubes by forcing ambient air over the exterior...
Flare tip burn back and its causes
Flare tip burn back is caused by low exit velocities of the gas at flare tip. The flare tip and flare stack diameter are...
Emissivity Coefficient or F factor for flare tip
Emissivity coefficient for a flare tip is the fraction of heat generated at the flare tip that is radiated to...
Flare/Vent network in oil refineries, oil and gas processing plants, all the relief devices that can emit hydrocarbons are connected to a flare/vent network...
Liquid seals are used at the base of flare stacks to prevent air ingress into the flare stack and further into the flare / vent network.
Flare / Vent...
A multi phase flow meter is used to measure the flowrates of produced crude oil, water and gas phases from an oil production well. A multiphase flowmeter can...
All rotating machines, pumps included, vibrate to some extent due to various reasons, the most common of which are typically the following:
Improper...