Typical Control Valve Datasheet for Pneumatically Actuated Valves - Control valves are typically operated with instrument air and are therefore characterised as pneumatically actuated valves. In order to be able to order the best control valve suited for the application, the user has to provide the valve manufacturer with all the necessary information to select and design a suitable control valve. Most important information to be given is type of the valve, range of fluid flow rates, corresponding range of pressure and temperature at the inlet and outlet of valve etc. Typically normal/minimum/maximum temperature, flow and pressure drop values are given for the vendor to correctly size the control valve.
Typical Motor Operated Valve Datasheet - In order to procure the best MOV suited for the application, the user has to provide the valve manufacturer with all the necessary information to select and design a suitable MOV. Information such as - process conditions, line size, valve body type, information for the motor, opening and closing time requirements for the valve etc. - has to be clearly specified in the datasheet for MOV.
Typical Safety Relief Valve Datasheet - When ordering a safety relief valve, the user has to provide the Manufacturer with a specification sheet (datasheet) that specifies all necessary information for that relief valve. The datasheet of a safety relief valve should include the following items - General information, information of protected equipment, applicable standards, process conditions (pressure, temperature, relieving rate etc.), type, material and tentative size for the relief valve.