Choke valves are typically used at wellhead and larger pressure drop services. Choke valve can be manual, flow control or pressure control. It takes signal from respective (flow, pressure or operations set point) and throttles/ maintains production at desired rate. Choke valve are also used at gas-lift line of oil wells to maintain flow or pressure. Typical schematic of choke valve is shown below
These valves help manage the pressure and flow rates to prevent damage to the well or equipment and serve critical purpose during the production phase. This...
Liquid (or interface liquid) is in physical contact with gas or other liquid phase. Liquid is taken out from unit operations. Level measurement is done using...
Upstream pressure regulator valve are pressure regulator maintaining upstream pressure. Upstream Pressure maintained by valve opening and closing with...
Table of content:1.What is a pressure control valve?2. How do pressure control valves work?
What is a pressure control valve?
Pressure Control...
Depending on the heating and cooling requirement, temperature is measured and it send signal to controller. Controller compares the reading and gives inputs to...