It is done to increase the pressure of the gas, this is accompanied by change of state of the gas which means change in temperature and volume of a quantum of...
Author - wpadmin
Table of content1. Types of Compressors2. Rotodynamic Compressors2.1. Centrifugal Compressors2.2. Axial Flow Compressor3. Positive Displacement Compressors3.1...
Table of content:
1. Sulphur recovery process
2. Sulphur Recovery Unit
Sulphur recovery process
Sulphur recovery is the process of converting hydrogen...
Spheroids – Spherical in shape except that it is somewhat flattened. They are used to storing products above 35 kPa.
Horizontal cylindrical tanks...
where,
= Terminal velocity
= Liquid droplet diameter
= Heavy liquid phase density
= Light liquid phase density
= Drag coefficient
= Gravitational...
Efficiency of heat transfer equipment
Some fundamental parameters governing the efficiency of heat transfer.
1. Temperature difference - High temperature...
Heat transfer equipment can be classified into various types based on structure, phases of fluid involved, and the principle of operation.
Table of...
where,
= Terminal / critical velocity of gas so that a liquid droplet of size can settle out of the gaseous stream
= Liquid droplet diameter
= Liquid phase...
There are several end products / product types of crude oil refining processes, some of which are described here.
Fuel gas
The lightest gas (C1 to C3)...
Crude Oil Storage
Generally crude oil is extracted from the geological sources then stored in the crude form until it is shipped to a refining facility where...
Atmospheric Distillation Unit (ADU)
Crude oil is sent to the atmospheric distillation unit after desalting and heating. The purpose of atmospheric distillation...
Usually crude oil extracted from geological sources is accompanied by hydrogen sulphide gas (H2S). This H2S is separated from rest of the oil at the...