Author - wpadmin
Steam T-H diagram (Temperature Vs Enthalpy) depicts the phase change of:
liquid water (1) -> boiling water (wet steam) (2-3) -> dry steam ->...
Depending on the engineering deliverables being reviewed, their are some commonly practiced review meetings which have now become quite standard.
3D Model...
That's why pressure relief valves or safety valves are one of the most important components in process industries to maintain the safety and integrity of the...
Flare radiation plots typically consist of isopleths. Isopleths are curves on a map of the flare surroundings which connect geographical points receiving the...
Air ingress in flare network
Typically the flare/vent network along with the vent KO drum operates at a low pressure close to atmospheric pressure. This...
However, the normal gas flow in the flare stack is much lower than the design flow rate, resulting in low exit gas velocities at the flare tip. Low gas...
The emissivity coefficient depends on the nature of gas being burned, design of the flare tip, liquid content in the gas in flare stack and gas flow rate...
Air Ingress
Typically the flare/vent network along with the vent KO drum operates at a low pressure close to atmospheric pressure. This pressure is actually...
Flare / Vent Stack
Flare/Vent network in oil refineries, oil and gas processing plants, all the relief devices that can emit hydrocarbons are connected to a...
But often we need a benchmark for air density to be used as reference point in thermodynamic calculations involving air or other gases. For that purpose, we...
A multiphase flow meter is used to measure the flow rates of multiple phases, such as crude oil, water, and gas, in an oil production well. It is designed to...