Table of content:1. Slug flow2. How does a slug catcher works?3. Types of slug catchers3.1. Vessel type slug catchers3.2. Finger type slug catchers3.3. Parking...
Author - wpadmin
Even in crude oil refining facilities, steam and water are often used in many units such as atmospheric distillation unit, naphtha hydrotreater unit, kerosene...
To protect the surface facilities in case of emergency, the wellbore is isolated from surface facilities using a subsurface safety valve (SSSV). Hence such a...
Single Well Completion
A single completion well corresponds to a single zone of fluids from a sinle wellbore. A single tubing string installation to encloses...
How does a compressor choke?
Stonewall or choke point for a centrifugal compressor occurs when the resistance to flow in the compressor discharge line drops...
Figure 1 - Typical PFD for an Instrument Air Supply System
Figure-1 depicts a typical process flow diagram (PFD) for instrument air supply system. As shown in...
Instrument air is made available to the instrument air headers by compressing the atmospheric air. The compressed air being used for instruments is needed to...
Demister Pads - The demister pads work by coalescing smaller liquid droplets by obstructing their path. Obstruction of path causes increased collisions among...
Schoepentoeters in Columns
For columns, it is important the channeling of fluid, especially through the packed beds, leads to reduced gas liquid contact and...
It moves through the pipeline, scraping or brushing the internal surfaces to remove debris, scale, corrosion, and other contaminants that can accumulate over...
Table of content:
Typical compressor P&ID
Procedure to prepare P&ID diagram of Centrifugal compressor system
Typical compressor P&ID
Figure...
For galvanic corrosion to occur, two dissimilar metals need to be in contact with each other and with an electrolytic fluid. When two dissimilar metals are in...